TRANSAXLE
J
Dltterenllal
'1.
Remove the bearing outer races trom the transaxle case
and remove the adjustment shims.
Note
.
Turn A
and
B untilthe
gap
(anow)
in lhe tigu.e is
eliminated,
2. Install
the differential
side bearing
outer
race to the
SST
(selector).
3. Set the bearing outer race and diiferential assembly into the
clutch housino.
4. Set the bearing outer race and SST onto the differential as-
sembly as shown in the fagure.
5. Slide the transaxle case over the ditferential assemblv
J-41
To Next Page
Loading...
