POWERHEAD
90-826883R2 JUNE 1998 Page 4-39
NOTE: If the tip of an awl can be inserted between the needle bearings, one or more
needles are missing and must be replaced.
57111
c. Install upper locating washer.
a
57113
a - Locating Washer
d. Slide piston onto connecting rod, centering piston pin bore over sleeve.
e. Slide piston tool up thru piston pin bore and remove sleeve.
57114
b
a
a - Sleeve
b - Piston Pin Tool (91-76160A2)
To Next Page
Loading...
