MANUAL STARTER
Page 8-12 90-826883R2 JUNE 1998
Cleaning and Inspection
1. Clean rewind spring assembly with solvent and dry with compressed air.
2. Inspectrewindspring(withoutremovingspringfromretainer)forkinks,burrsorbreak-
age. Replace assembly if necessary.
3. Inspect cam tension spring for damage. Replace as necessary.
4. Inspectstartersheaveandhousingfornicks,grooves,cracksanddistortionespecial-
ly in area of rope travel. Replace assembly if necessary.
5. Inspect starter rope for wear and replace if necessary.
Reassembly
1. Apply 2-4-C w/Teflon (92-825407A12) to rewind spring and cam tension spring.
2. Install rewind spring assembly into recoil housing positioning end of spring in notch.
53161
a
b
c
57059
95
2-4-C With Teflon (92-825407A12)
95
a - Rewind Spring
b - Notch
c - Cam Tension Spring
To Next Page
Loading...
