BATTERY CHARGING AND STARTING SYSTEMS
90-826883R2 JUNE 1998 Page 2B-23
Neutral Start Switch (Electric Start Tiller Handle Shift
Models)
1. Mount neutral start switch onto control platform with 2 bolts and plate.
2. Torque mounting bolts to 5 lb. in. (0.6 N·m).
53077
a
b
c
a - Neutral Start Switch
b - Plate
c - Bolts [Torque to 5 lb in. (0.6 N·m)]
3. Route switch harness over block. Secure harness to stator harness with sta-strap.
4. Route harness behind rectifier. Attach BLACK lead to solenoid mount bolt. Attach
Black lead with YELLOW sleeve to terminal 1 of starter solenoid.
53076
b
c
d
a
e
a - Switch Harness
b - BLACK Lead
c - BLACK Lead with YELLOW Sleeve
d - Terminal 1
e - Sta-strap
To Next Page
Loading...
