TILLER HANDLE
Page 7B-8 90-826883R2 JUNE 1998
Installation
1. Wrap cables around pulley. Top cable wraps and locks in top groove. Bottom cable
wraps and locks in bottom groove.
2. Place pulley and cable assembly into pulley case.
53257
a
b
c
a - Pulley
b - Top Cable
c - Bottom Cable
3. Install pulley cover and secure cover with bolt.
53262
a
b
a - Cover
b - Bolt (Drive Tight)
4. Install pulley assembly into tiller handle and slide tiller tube into pulley.
53256
a
b
a - Pulley Assembly
b - Tiller Tube
To Next Page
Loading...
