TILLER HANDLE
90-826883R2 JUNE 1998 Page 7B-11
3. Rotate tiller handle to FORWARD gear position.
4. Route remaining cable belowprimary gear pulley andsecure cableinto outergroove
of pulley. Place cable jacket into lower notch of cable anchor bracket.
5. Rotate tiller handle twist grip to NEUTRAL.
6. Rotate tiller handle twist grip to SLOW position.
7. Adjustjamnutstoremoveslackfromthrottlecableswhileallowingfulltravelofthrottle
linkage/carburetor throttle shutter.
57049
a
b
c
d
e
a - Cable
b - Outer Groove
c - Cable Jacket
d - Lower Notch
e - Jam Nuts
8. Reinstall access cover. Secure cover with nut and bolt. Torque nut to 50 lb. in. (5.6
N·m).
57035
b
a
a - Access Cover
b - Nut -- Torque to 50 lb. in. (5.6 N·m)
To Next Page
Loading...
