Micromeritics TRISTAR II PLUS - Page 111

A. Suspend/Resume/Skip
buttons
B. Port report buttons
C. Live graph settings
Selections
Description
Port [button]
Generates a report on data being collected on the respective port.
The reports are displayed on the computer monitor only.
Live Graph Settings
[button]
Select Thermal transpiration, x-axis Quantity (relative or absolute
pressure), and the x-axis Scale (linear or logarithmic).
Report after analysis
[button]
Generates reports to the selected destination when the analysis is
complete.
Status window
Displays the last point pressure and relative pressure for each port
with varying numbers of digits after the decimal if 10 mmHg and 0.1
mmHg transducers are present on that port, as follows: P < 0.1: 6
digits, 0.1 <= P < 10: 4 digits, P >= 10: 2 digits. Relative pressure will
show 3 more digits than absolute pressure.
For fields and buttons not listed in this table, see Common Fields and
Buttons on page2 - 3.
Sample Analysis Graph
Perform a Sample Analysis
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023
6 - 19