Micromeritics TRISTAR II PLUS - Page 170

8 Selected Report Options
BJH Plot
The fields for all plot options are identical for specifying plotting methods and customizing plots.
Highlight any plot option in the Selected Reports list box in the BJH Report Options window, then
click Edit.
Selections
Description
Autoscale [checkbox]
When enabled on the report parameters windows, allows the x-and
y-axes to be scaled automatically. Autoscale means that the x-and
y-ranges will be set so that all the data is shown. If Autoscale is not
selected, the entered range is used.
Plot curve / Plot points
[checkbox]
Select to plot points on the graph.
X-Axis [groupbox]
Use to have the x-axis on a logarithmic or linear scale.
Y-Axis [groupbox]
Overlay. Select an option to overlay onto the current report.
Variable. Select a variable.
For fields and buttons not listed in this table, see Common Fields and
Buttons on page2 - 3.
BJHPlot Report
8 - 12
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023