Micromeritics TRISTAR II PLUS - Page 171

BJH Tabular Report
Highlight BJH Tabular Report in the Selected Reports list box on the BJH Adsorption Report
Options window, then click Edit to specify the method of data reduction.
Selections
Description
Collected points
[selection]
Use to include all relative pressure points collected. See the
Columns button below.
Columns [button]
Select the data types to include in the report. Column [n] indicates
the column order and data contents for the report.
Fixed pore size table
[selection]
Use to specify exact pore sizes for volume or area data. Click Table
to modify the fixed pore size table. See the Table and Columns but-
tons elsewhere in this table.
Table [button]
The fixed pore size table must contain a minimum of two points. The
points must be strictly decreasing. Enabled only when Fixed pore
size table is selected.
For fields and buttons not listed in this table, see Common Fields and
Buttons on page2 - 3.
BJHTabular Report
BJH Adsorption/Desorption Report
TriStar II Plus Operator Manual
303-42800-01 (Rev M ) — Sep 2023
8 - 13