Microplex logiJET T4-2 - Generating Test Prints (Sliding Pattern)

Panel Functions 113
________________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual logiJET T4-2 /T6-2 /RFID Edition 2.2
9.15. Generating Test Prints (Sliding Pattern)
This function generates a series of test prints without sending
data to the printer.
These test prints facilitate error analysis.
Panel display
[ON LINE ]
[OFF LINE ]
[Menu Level 1 ]
[Status Sheet ]
  
[Sliding Pattern ]
[Sliding Pattern ]
Notes
Turn the printer OFF LINE with this
key.
The ENTER key gives the user access
to the menu structure.
Menu level 1 is selected.
Press the NEXT or PREVIOUS key
until [Sliding Pattern ] is displayed.
A series of test prints is generated.
Turn the printer ONLINE again:
Press the ONLINE key longer than 2
seconds.

The printing out of test prints can be stopped by pushing the
ESC key.
Mantenimiento Periféricos Informáticos C/Canteras, 15 28860 Paracuellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/