Microplex logiJET T4-2 - Emulation Selection

Panel Functions 115
________________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual logiJET T4-2 /T6-2 /RFID Edition 2.2
9.17. Emulation Selection
With this function you can change the active emulation.
Panel display
[ON LINE ]
[OFF LINE ]
[Menu Level 1 ]
  
[Configuration ]
[Interface ]
  
[Emulation ]
[SOLID Standard ]
  
[Datamax ]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this
key.
The ENTER key gives the user access
to the menu structure.
Press the NEXT or PREVIOUS key until
[Configuration ] is displayed.
Press the NEXT or PREVIOUS key until
[Emulation ] is displayed.
Press the NEXT or PREVIOUS key until
the desired emulation (e.g. Datamax)
is displayed.
The emulation Datamax is selected.
In addition this new value can be
saved as setup value (using the ENTER
key).
After this decision turn the printer
ONLINE again: Press the ONLINE
key longer than 2 seconds.
Mantenimiento Periféricos Informáticos C/Canteras, 15 28860 Paracuellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/