Access to the integrated Web Page 55
_________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual logiJET T4-2 /T6-2 /RFID Edition 2.2
7. Control the Print System Remotely via Website / IP-Admin Panel
7.1. Abstract
You can also access the logiJET T4-2 /T6-2 remotely.
The internal web page of the printer enables you for example to control or
configure the printer using a computer that is connected via Ethernet
(MICROPLEX IP-Panel and WebPanel).
7.2. Connecting the Printer to the Network
1. Connect the logiJET T4-2 /T6-2 to your network* (via the Ethernet port,
compare section 6.1 Attaching the Printer to a Network/PC).
The following network parameters** are for instance factory default settings:
IP Address 192.168.128.128
Subnet mask 255.255.255.0
Gateway 0.0.0.0
2. The status sheet (see section 9.8) contains information about the current
printer configuration and the IP address of the printer.
The panel function Show Info (see section 9.9) serves to show some basic
information about your printer: the IP Address, Firmware Release, Serial
Number and the current Printer Emulation.
3. Start your Web Browser and type the IP address of the printer in the address
bar of the Web browser:
http://192.168.128.128/
* More details are described in the document Networking Features of MICROPLEX
Printers. You’ll find this document on the MICROPLEX Documentation CD. The
CD belongs to the extent of supply of your printer.
** The network settings can be changed.
(See section 9.33 Configuration of Network Parameters).
The status sheet of the logiJET T4-2 /T6-2 shows the current settings.
Mantenimiento Periféricos Informáticos C/Canteras, 15 28860 Paracuellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/
To Next Page
Loading...
