80 Panel Functions
________________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual logiJET T4-2 /T6-2 /RFID Edition 2.2
9.1. Print Process Selecting
This function allows to select the print process.
While thermal direct printing the device operates without ribbon,
direct thermal media is required.
While thermal transfer printing a ribbon is needed to transfer the
print contents onto the media (see chapter 5 Handling of
Consumables, too).
For thermal direct printing it is not allowed to insert a ribbon to
avoid damaging the printhead.
Make sure your settings match to the printer implementation (ribbon
inserted/not inserted).
Description of this control panel function continues on the next page.
Mantenimiento Periféricos Informáticos C/Canteras, 15 28860 Paracuellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/
To Next Page
Loading...
