Printer Configuration and Menu Structure 77
________________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual logiJET T4-2 /T6-2 /RFID Edition 2.2
8.3. Syntax of Diagrams
The control panel functions will be described using diagrams.
These diagrams show the course necessary in order to activate a
certain function.
First the elements of the diagram are explained:
The sequence on the left describes which keys have to be pressed
briefly in succession.
In this example the ONLINE key has to be pressed first.
Then the ONLINE key is released and the ENTER key has to be
pressed. Then the ENTER key has to be released and the NEXT key
has to be pressed.
The Panel display column shows the display messages
corresponding to the sequences listed on the left.
In the column Notes explanations to particular operational steps
are given.
Mantenimiento Periféricos Informáticos C/Canteras, 15 28860 Paracuellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/
To Next Page
Loading...
