Microplex logiJET T4-2 - 10 Using the RFID Functions; Integrated RF Write;Read Module; CE - Conformity

Using the RFID Functions 145
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual logiJET T4-2 /T6-2 /RFID Edition 2.2
10. Using the RFID Functions
The printers logiJET T4-2 and logiJET T6-2 are optionally equipped with an
compact reader (RF Write/Read module).
The following sections are valid only for printers incorporating the integrated
compact reader (factory option).
10.1. Integrated RF Write/Read module
A Block diagram of High Frequency Identification technology (RFID, Radio
Frequency IDentification) is shown in section 1.2 Information on RFID
Technology.
The MICROPLEX RFID printers incorporate an integrated Write/Read module
in the paper path to write and read the RFID tags.
RFID tags have coils built into them. When these tags line-up over an antenna,
the information of the tag can be read.
10.1.1. CE - Conformity
See next page.
Mantenimiento Periféricos Informáticos C/Canteras, 15 28860 Paracuellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/