178 Operator Maintenance
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual logiJET T4-2 /T6-2 /RFID Edition 2.2
11.1.3. Transport Roller Cleaning
The printer’s transport rollers (platen roller and transport rollers) can
be soiled by the print media (e.g. with adhesive residues).
For the following cleaning operations the hints of section 11.1.2 are
valid, too !
Stickings can be removed best with a soft lint-free cloth saturated
with isopropyl alcohol (99.9 %).
Make sure the concerning transport rollers have been cleaned on
their whole extent so that there is no reason for irregular media
transport after that.
Allow the transport rollers to dry for at least 3 minutes.
Mantenimiento Periféricos Informáticos C/Canteras, 15 28860 Paracuellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/
To Next Page
Loading...
