24 Media and Ribbon Requirements
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual logiJET T4-2 /T6-2 /RFID Edition 2.2
3. Media and Ribbon Requirements
Since print quality is affected by media and ribbon, printing speeds, and
printer operation modes, it is very important to run tests for your applications.
Fig. 3.a Labels
To use the RFID capabilities of this printer, you will need the appropriate RFID
media. This media includes the label, backing, and an RFID transponder inlay
encased by the label material.
Only high-quality RFID media has to be used.
A general rule is:
High quality labels are always recommended to ensure against premature
printhead wear.
We strongly recommend the use of MICROPLEX supplies for continuous high-
quality printing.
Mantenimiento Periféricos Informáticos C/Canteras, 15 28860 Paracuellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/
To Next Page
Loading...
