Microplex logiJET T4-2 - Function of the Control Panel Elements

Setting up the Printer 53
_________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual logiJET T4-2 /T6-2 /RFID Edition 2.2
6.3.1. Function of the Control Panel Elements
Display
The display (LCD-panel) serves to show the printer’s status messages..
Light ring of the ON LINE key
In addition to the display messages the Light ring of the ONLINE key
indicates the printer status:
The printer is ready (ON LINE) to receive data from the host.
The printer is not ready to receive data from the host (OFF LINE).
The control panel keys are active.
Light ring of the ENTER key
Error indication
When an error occurs, a corresponding error message is displayed by
the printer.
In addition, the ring oft he ENTER key ligths up red.
After the error was fixed, the printer is ready again. The ring of the
ENTER key is colorless again.
Mantenimiento Periféricos Informáticos C/Canteras, 15 28860 Paracuellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/