Microplex logiJET T4-2 - 4 Basic Operation Sequences; Overview

Basic Operation Sequences 25
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual logiJET T4-2 /T6-2 /RFID Edition 2.2
4. Basic Operation Sequences
4.1. Overview
print process selecting
thermal direct
thermal transfer
ribbon removal
ribbon loading
media loading
media (material) setting
label
continuous
page length /paper width setting
margin setting
see chapter 7 to 9
see chapter 5
see chapter 5
see chapter 5
see chapter 7 to 9
see chapter 7 to 9
see chapter 7 to 9
start
printhead pressure adjusting
see chapter 5
RFID-Mode selection (optional)
see chapter 10
Communication protocol setting
see chapter 10
Transponder position adjusting
see chapter 10
Mantenimiento Periféricos Informáticos C/Canteras, 15 28860 Paracuellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/