Microplex logiJET T4-2 - Selection of Memory Distribution (Input Buffer)

Panel Functions 119
________________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual logiJET T4-2 /T6-2 /RFID Edition 2.2
9.20. Selection of Memory Distribution (Input Buffer)
This function enables the user to choose the distribution of the available
RAM memory between input buffer and macro/download memory.
Panel display
[ON LINE ]
[OFF LINE ]
[Menu Level 1 ]
  
[Configuration ]
[Interface ]
  
[Input Buffer ]
[32 kB ]
  
[100 kB ]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this key.
The ENTER key gives the user access to
the menu structure.
Press the NEXT or PREVIOUS key until
[Configuration ] is displayed.
Press the NEXT or PREVIOUS key until
[Input Buffer ] is displayed.
Press the NEXT or PREVIOUS key until
the desired memory distribution is
displayed. The input buffer size is
specified in kilobyte (kB) or in percent
of the installed memory.
100 kB is selected as input buffer.
In addition this new value can be saved
as setup value (using the ENTER key).
After this decision turn the printer
ONLINE again: Press the ONLINE key
longer than 2 seconds.
Mantenimiento Periféricos Informáticos C/Canteras, 15 28860 Paracuellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/