Microplex logiJET T4-2 - Page 133

Panel Functions 133
________________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual logiJET T4-2 /T6-2 /RFID Edition 2.2
Peripheral device selection:
Panel display
[ON LINE ]
[OFF LINE ]
[Menu Level 1 ]
  
[Engine ]
[Printspeed ]
  
[Service Mode ]
[Dot-Test ]
  
[Optional Devices ]
[Periph. Device ]
[TearOff Edge ]
  
[Cutter ]
[Saved! ]
Notes
Turn the printer OFF LINE with this
key.
The ENTER key gives the user access
to the menu structure.
Press the NEXT or PREVIOUS key until
[Engine ] is displayed.
Press the NEXT or PREVIOUS key until
[Service Mode ] is displayed.
Press the NEXT or PREVIOUS key until
[Optional Devices ] is displayed.
The panel function Optional Devices is
selected.
Select the submenu [Periph. Device ] .
Press the NEXT or PREVIOUS key until
the desired peripheral device is
displayed.
The cutter (option) is selected.
Turn the printer ON LINE again:
Press the ENTER key longer than 2
seconds.
Mantenimiento Periféricos Informáticos C/Canteras, 15 28860 Paracuellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/