Microplex logiJET T4-2 - Page 189

Troubleshooting 189
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual logiJET T4-2 /T6-2 /RFID Edition 2.2
Defect
Remedies
Printout blurred or
incomplete
- clean the printhead
(see section 11.1.2)
- check the ribbon transport
(load the ribbon again, if necessary;
see section 5.3)
- also, see section 12.3: Incorrect Media Transport
- the printhead has to be exchanged if, for example
after a big printout performance the printout isn’t
correct any more (printhead exchange; see
section 11.2)
If the remedies above are not successful, please call a MICROPLEX
authorized service engineer.
Mantenimiento Periféricos Informáticos C/Canteras, 15 28860 Paracuellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/