Handling of Consumables 45
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual logiJET T4-2 /T6-2 /RFID Edition 2.2
The unused ribbon can remain within the device until it is
used for the next thermal transfer operation (if necessary
protect the ribbon against unintentional unwinding).
The ribbon has to be loaded as described in section
5.3.1.
7. Rotate the rewind shaft until the free end of the used-up
ribbon is winded up.
8. Remove the used-up ribbon from the rewind shaft and
dispose it according to the rules.
The media for thermal direct printing has to be loaded as
described in section 5.2.1.
Mantenimiento Periféricos Informáticos C/Canteras, 15 28860 Paracuellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/
To Next Page
Loading...
