Panel Functions 91
________________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual logiJET T4-2 /T6-2 /RFID Edition 2.2
To get access to the Service Functions you have to start the printer in the
Service Mode:
The Service Functions can be carried out by a MICROPLEX authorized
operator or a service engineer.
A not trained person is not allowed to carry out this operations.
Please be especially careful when carrying out the following operations to
avoid maladjustments and damaging the printer.
Start the printer in the Service Mode:
Turn the printer off
+
Turn the printer on
Panel display
[Service Mode ]
Notes
Before starting the printer the
ENTER key and NEXT key have to be
pressed simultaneously.
Turn the printer on and keep the keys
ENTER and NEXT pressed until the
messages [Service Mode ] is displayed.
Now the functions of the service menu
are available (compare dashed areas
in the Menu Structure of section 8.2).
Mantenimiento Periféricos Informáticos C/Canteras, 15 28860 Paracuellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/
To Next Page
Loading...
