Miller OptX 2kW - Device Safety Label Locations; Figure 1 Laser Safety Banner Label - Primary Laser; Figure 2 Laser Safety Banner Label - Guide Laser

Safety and Compliance Information
35
OM-296747A | 4/15/24
2.2.7 Device Safety Label Locations
The safety label banner which is affixed on the device, provides information on the
laser radiation hazards that are present in your particular device.
The Miller safety label and the information listed on the safety label will vary based
on the output power(s), wavelength(s), and other performance characteristics. It
is important to review the labels affixed to the product for specific information
about your laser device.
This product has the required safety labels located on the outside of the device
enclosure at various locations. These include warning labels indicating removable
or displaceable protective housings, apertures through which laser radiation is
emitted and labels of certification and identification.
Refer to Table 9 [▶36] for a description of all safety labels and their placement on
the product.
▼Figure 1. Laser Safety Banner Label - Primary Laser
▼Figure 2. Laser Safety Banner Label - Guide Laser