Revision:1.0(2023-01-12)
219
3. Refer to the disassembly procedures in 7.11.2 Disassembly and Assembly, 7.12.2 Disassembly
and Assembly
, 7.14.2 Disassembly and Assembly, 7.17.2 Disassembly and Assembly, and 7.18.2
Disassembly and Assembly to take it off.
4. Remove the 10 Phillips pan-head screws on the Main Board Assembly (FRU), take out the
Main Unit Dual Fans (FRU) and Main Unit Single Fan (FRU) from the fan bracket, and then take
off the Main Board Assembly (FRU).
1 10 Phillips pan-head screws
7.13.3 Commissioning and Verification
None
Diagnostic Ultrasound System
Service Manual
7 FRU Replacement
To Next Page
Loading...
