Revision:1.0(2023-01-12)
165
5.2.3 Importing Configuration File after SSD Replacement
55..22..33..11 Importing Configuration File after SSD Replacement
When you turn on a TEX series machine for the first time after replacing SSD, the system will
prompt importing the configuration file. Perform the following steps:
1. After replacing SSD, contact Mindray after-sales service engineer to download the
configuration file from Mindray internal platform.
2. Decompress the configuration file, copy it to a USB drive and check whether the folder contains
Config.key.
Diagnostic Ultrasound System
Service Manual
5 Maintenance
To Next Page
Loading...
