Revision:1.0(2023-01-12)
236
Tools Required
Art knife, crosshead screwdriver (M4), flatheaded screwdriver, and socket head wrench (M5)
Fixtures Required
None
Specific Steps
1. Refer to the disassembly procedure in 7.22.2 Disassembly and Assembly to remove the hook
decoration cover.
2. Use a socket head wrench to remove the six hexagon socket combination screws (M5×16) to
take off the hook for wire.
1 Six hexagon socket combination screws (M5×16)
7.23.3 Commissioning and Verification
None
Diagnostic Ultrasound System
Service Manual
7 FRU Replacement
To Next Page
Loading...
