Revision:1.0(2023-01-12)
300
1 Back board of the battery box
2 12 M4x12 crosshead combination screws
5. Use a crosshead screwdriver to remove the one M3x8 crosshead combination screw that
connects the spring cable.
1 One M3x8 crosshead combination screw
6. Use a crosshead screwdriver to remove the one M4x12 crosshead combination screw that
connects the steel guide rod of the spring, and take off the spring cable.
Diagnostic Ultrasound System
Service Manual
7 FRU Replacement
To Next Page
Loading...
