Revision:1.0(2023-01-12)
302
Assembly
, 7.30.2 Disassembly and Assembly, and 7.27.2 Disassembly and Assembly, and take
off each assembly.
2. Use a crosshead screwdriver to remove the three M3×8 crosshead combination screws that
connect the magnetic connector and the magnetic connection cable, so as to take off the
magnetic connector and the magnetic connection cable.
1 Three M3×8 crosshead combination screws
7.63.3 Commissioning and Verification
None
Diagnostic Ultrasound System
Service Manual
7 FRU Replacement
To Next Page
Loading...
