20-4
20.4.6 Clearing Recording Tasks
In the [Record Setup] menu, select [Clear All Tasks]. All queued recording tasks are cleared
and the current recording is stopped.
20.5 Loading Paper
1. Use the latch at the upper right of the recorder door to pull the door open.
2. Insert a new roll into the compartment as shown below.
3. Close the recorder door.
4. Check if paper is loaded correctly and the paper end is feeding from the top.
CAUTION
z Use only specified thermal paper. Otherwise, it may cause damage to the
recorder’s printhead, the recorder may be unable to print, or poor print quality
may result.
z Never pull the recorder paper with force when a recording is in process.
Otherwise, it may cause damage to the recorder.
z Do not leave the recorder door open unless you reload paper or remove troubles.
Paper roll
To Next Page
Loading...
Need help?
General
