3-1
3 Basic Operations
3.1 Installation
WARNING
z The equipment shall be installed by personnel authorized by us.
z The software copyright of the equipment is solely owned by us. No organization or
individual shall resort to juggling, copying, or exchanging it or to any other
infringement on it in any form or by any means without due permission.
z Devices connected to the equipment must meet the requirements of the applicable
IEC standards (e.g. IEC 60950 safety standards for information technology
equipment and IEC 60601-1 safety standards for medical electrical equipment).
The system configuration must meet the requirements of the IEC 60601-1 medical
electrical systems standard. Any personnel who connect devices to the equipment’s
signal input/output port is responsible for providing evidence that the safety
certification of the devices has been performed in accordance to the IEC 60601-1. If
you have any question, please contact us.
z If it is not evident from the equipment specifications whether a particular
combination with other devices is hazardous, for example, due to summation of
leakage currents, please consult the manufacturers or else an expert in the field, to
ensure the necessary safety of patients and all devices concerned will not be
impaired by the proposed combination.
3.1.1 Unpacking and Checking
Before unpacking, examine the packing case carefully for signs of damage. If any damage is
detected, contact the carrier or us.
If the packing case is intact, open the package and remove the equipment and accessories
carefully. Check all materials against the packing list and check for any mechanical damage.
Contact us in case of any problem.
NOTE
z Save the packing case and packaging material as they can be used if the equipment
must be reshipped.
To Next Page
Loading...
Need help?
General
