EasyManuals Logo

Mindray uMEC15 User Manual

Mindray uMEC15
288 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #226 background imageLoading...
Page #226 background image
A-2
NOTE
z The environmental specifications of unspecified parameters are the same as those
of the main unit.
A.2 Power Supply Specifications
AC power
Line voltage 100 to 240 VAC (±10ˁ)
Current 1.5 A
Frequency 50/60 Hz (±3Hz)
Battery (standard configuration)
Battery Type Chargeable Lithium-Ion, 11.1DVC, 2.5 Ah
Run time
uMEC15:  2.5 h
uMEC10/uMEC12:  4 h
when powered by a new fully-charged battery (25ć, display
brightness set to default value, SpO
2
cable connected, ECG
cable and Temp cable not connected, auto NIBP measurements
at an interval of 15 minutes)
Charge time
When the monitor is powered off,
less than 3.5 hours to 90%
less than 4 hours to 100%
When the monitor is in use,
less than 5.5 hours to 90%
less than 6 hours to 100%
Shutdown delay at least 5 min (after a low battery alarm first occurs)
Battery (optional configuration)
Battery Type Chargeable Lithium-Ion, 11.1DVC, 5 Ah
Run time
uMEC15:  6 h
uMEC10/uMEC12:  8 h
when powered by a new fully-charged battery (25ć, display
brightness set to default value, SpO
2
cable connected, ECG
cable and Temp cable not connected, auto NIBP measurements
at an interval of 15 minutes)
Charge time
When the monitor is powered off,
Less than 7 hours to 90%
Less than 8 hours to 100%

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mindray uMEC15 and is the answer not in the manual?

Mindray uMEC15 Specifications

General IconGeneral
BrandMindray
ModeluMEC15
CategoryMedical Equipment
LanguageEnglish

Related product manuals