6. Getting started
MiR1350 User Guide (en) 05/2022 - v.1.2 ©Copyright 2021-2022: Mobile Industrial Robots A/S. 61
access point that is approved for use in your region. If you choose to use an
access point, you must ensure that the robot is disconnected from the wireless
network before attaching the access point to remain compliant—see Connecting
the robot to a WiFi network on page64.
The robot is certified to have only one radio module active at any
given time.
Whether you connect via Ethernet cable or an access point dongle, it
is recommended that the client is configured to DHCP. See the
documentation of your operating system.
If you require a static IP on the client, assign an address above
192.168.12.150 and set the DNS server and Gateway address to
192.168.12.1. See the documentation of your operating system.
WARNING
Harmful electromagnetic interference might be the result of having
two radio modules transmitting at the same time.
•
Do not attach an access point or additional radio modules to the
robot while it is connected to a wireless network.
To Next Page
Loading...
