MIR 1350 - Charging the MiR1350 Robot

7. Battery and charging
MiR1350 User Guide (en) 05/2022 - v.1.2 ©Copyright 2021-2022: Mobile Industrial Robots A/S. 77
Pos. Description Pos. Description
5 Battery lever: Used to
change between top,
center, and bottom
positions.
6 Battery lock pin:Pull the pin
out to enable you to move
the Battery lever between
positions.
NOTICE
Do not parallel couple the battery with more batteries. Parallel
coupled batteries will result in the batteries shutting down.
7.1 Charging the robot
This section describes how to charge MiR1350 using a MiR cable charger.
NOTICE
The most efficient way to charge MiR robots is with MiR charging
stations. Cable chargers are intended as a backup solution as they
charge significantly slower than charging stations, and because they
can only charge the robot's battery to 80–90%.
A MiR cable charger is not part of the MiR1350 standard delivery.
Contact your distributor for more information.
To charge MiR1350 with a standard MiR cable charger, you will also
need an adapter for the cable to fit to the battery connector.The
adapter is supplied by MiR.