MIR 1350 - Robot Maintenance Procedures

14. Maintenance
MiR1350 User Guide (en) 05/2022 - v.1.2 ©Copyright 2021-2022: Mobile Industrial Robots A/S. 226
14. Maintenance
The following maintenance schedules give an overview of regular cleaning and
parts replacement procedures.
It is the responsibility of the operator to perform all maintenance tasks on the
robot.
The stated intervals are meant as guidelines and depend on the
operating environment and frequency of usage of the robot.
It is recommended to make a maintenance plan to make sure that all
maintenance tasks are done and that the responsible(s) are aware of
their tasks.
See the sections External parts on page16, Internal parts on
page23, and Accessing the internal parts on page43 to see
where the parts mentioned in the maintenance schedules are
located and how to access them.
NOTICE
Always disconnect the battery before performing maintenance tasks
to prevent unexpected start-up—see Disconnecting the battery on
page80.