MIR 1350 - Connecting to WiFi Network

6. Getting started
MiR1350 User Guide (en) 05/2022 - v.1.2 ©Copyright 2021-2022: Mobile Industrial Robots A/S. 64
Figure 6.2. You can see the software version your robot is running in the bottom left corner of the
robot interface.
6.6 Connecting the robot to a WiFi network
To communicate with the robot wirelessly without using an access point dongle,
connect the robot to your localWiFi network. This enables you to access the
robot interface via your WiFi network by entering the assigned IPaddress of your
robot in a web browser.