4. Safety
MiR1350 User Guide (en) 05/2022 - v.1.2 ©Copyright 2021-2022: Mobile Industrial Robots A/S. 33
4.2 General safety precautions
This section contains general safety precautions.
WARNING
Harmful electromagnetic interference might be the result of having
two radio modules transmitting at the same time.
•
Do not attach an access point or additional radio modules to the
robot while it is connected to a wireless network.
WARNING
If the robot is not running the correct software and is therefore not
functioning properly, the robot may collide with personnel or
equipment causing injury or damage.
•
Ensure that the robot is always running the correct software.
WARNING
When the robot is in an operating hazard zone, there is a risk of
injury to any personnel within the zone.
•
Ensure that all personnel are instructed to stay clear of operating
hazard zones when the robot is in the zone—see Using operating
hazard zones on page173.
To Next Page
Loading...
