MIR 1350 - Packing for Transportation; Original Packaging

15. Packing for transportation
MiR1350 User Guide (en) 05/2022 - v.1.2 ©Copyright 2021-2022: Mobile Industrial Robots A/S. 237
15. Packing for transportation
This section describes how to pack the robot for transportation.
15.1 Original packaging
Use the original packaging materials when transporting the robot.
Figure 15.1. The packing materials.
The packaging materials are:
•
The bottom of the box (the pallet)
•
The lid of the box (the ramp)
•
The walls of the box
•
The wheel stop board
•
Protective foam blocks: Side blocks and the top layer
•
Protective corner braces. The braces prevent the robot from being damaged
by the transport straps