MIR 1350 - Checking the Hardware Status

6. Getting started
MiR1350 User Guide (en) 05/2022 - v.1.2 ©Copyright 2021-2022: Mobile Industrial Robots A/S. 71
5. Drive the robot off the ramp using the joystick.
Place your foot in front of the ramp while the robot drives on it to
keep the ramp from slipping.
6.8 Checking the hardware status
To check that all hardware components work as intended, follow these steps:
1. Sign in to the robot interface—see Connecting to the robot interface on
page60.
2. Go to Monitoring > Hardware health.