MIR 1350 - Packing the Robot for Transportation; Battery

15. Packing for transportation
MiR1350 User Guide (en) 05/2022 - v.1.2 ©Copyright 2021-2022: Mobile Industrial Robots A/S. 238
15.2 Packing the robot for transportation
Before packing the robot for transportation:
•
Shut down the robot—see Shutting down the robot on page74.
•
Disconnect the battery—see Disconnecting the battery on page80.
To pack the robot, repeat the steps in Unpacking MiR1350 on page53 in the
reverse order.
NOTICE
Pack and transport the robot in an upright position. Packing and
transporting the robot in any other position voids the warranty.
15.3 Battery
The lithium-ion battery is subject to transport regulations. Make sure that you
follow the safety precautions in this section and the instructions in Packing for
transportation on the previous page. Different regulations apply depending
on the mode of transportation: land, sea, or air.
Contact your distributor for more information.
CAUTION
Lithium-ion batteries are subject to special transportation
regulations according to United Nations Regulation of Dangerous
Goods, UN 3171. Special transport documentation is required to
comply with these regulations. This may influence both transport
time and costs.