MIR 1350 - Mounting the Nameplate

6. Getting started
MiR1350 User Guide (en) 05/2022 - v.1.2 ©Copyright 2021-2022: Mobile Industrial Robots A/S. 72
3. Check that all elements on the page have the OK status and that they have
green dots on the left.
For more information, see Error handling on page266.
6.9 Mounting the nameplate
Before using MiR1350, you must mount its unique nameplate to it. The
nameplate contains information specific to your MiR application—see
Nameplate on page19.
NOTICE
The nameplate must be mounted as described in the following steps.
If mounted incorrectly, the CEmark is invalid.