Mitsubishi C70 User Manual

IV - 124
Appendix 7. Explanation of Alarms
Appendix 7.10 Multi CPU Errors (A)
A01 MULTI CPU ERROR 1403
Details
- There was no response from the intelligent function module when the END instruction is
executed.
- An error is detected at the intelligent function module.
- The I/O module (intelligent function module) is nearly removed, completely removed, or
mounted during running.
Remedy
- The CPU module, base unit and/or the intelligent function module that was accessed is
experiencing a hardware fault. Contact your local service center.
A01 MULTI CPU ERROR 1411
Details
- When performing a parameter I/O allocation the intelligent function module could not be
accessed during initial communications.
(On error occurring, the head I/O number of the corresponding intelligent function module
is stored in the common information.)
Remedy
- Reset and restart the CPU module.
If the same error is displayed again, the intelligent function module, CPU module or base
unit is faulty.
Contact your local service center.
A01 MULTI CPU ERROR 1412
Details
- The FROM/TO instruction is not executable, due to a control bus error with the intelligent
function module.
(On error occurring, the program error location is stored in the individual information.)
Remedy
- Reset and restart the CPU module.
If the same error is displayed again, the intelligent function module, CPU module or base
unit is faulty.
Contact your local service center.
A01 MULTI CPU ERROR 1413
Details
An error is detected on the system bus.
- Self-diagnosis error of the system bus.
- Self-diagnosis error of the CPU module
Remedy
- Reset and restart the CPU module.
If the same error is displayed again, the intelligent function module, CPU module or base
unit is faulty.
Contact your local service center.
A01 MULTI CPU ERROR 1414
Details
- An error is detected on the system bus.
- Fault of a loaded module was detected.
Remedy
- Reset and restart the CPU module.
If the same error is displayed again, the intelligent function module, CPU module or base
unit is faulty.
Contact your local service center.

Mitsubishi C70 Specifications

General

Brand	Mitsubishi
Model	C70
Category	Control Unit
Language	English