EasyManuals Logo

Mitsubishi C70 User Manual

Mitsubishi C70
536 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #470 background imageLoading...
Page #470 background image
IV - 125
Appendix 7. Explanation of Alarms
Appendix 7.10 Multi CPU Errors (A)
A01 MULTI CPU ERROR 1415
Details
- Fault of the main or extension base unit was detected.
Remedy
- Reset and restart the CPU module.
If the same error is displayed again, the intelligent function module, CPU module or base
unit is faulty.
Contact your local service center.
A01 MULTI CPU ERROR 1416
Details
- System bus fault was detected at PLC power-on or CPU module reset.
- In a multiple CPU system, a bus fault was detected at power-on or reset.
Remedy
- Reset and restart the CPU module.
If the same error is displayed again, the intelligent function module, CPU module or base
unit is faulty.
Contact your local service center.
A01 MULTI CPU ERROR 1430
Details
- A faulty of host CPU module was detected during the multi-CPUs high-speed
communication.
Remedy
- Reset and restart the CPU module.
If the same error is displayed again, this suggests a CPU module hardware fault.
Contact your local service center.
A01 MULTI CPU ERROR 1431
Details
- A communication error with another CPU module was detected during the multi-CPUs
high-speed communication.
Remedy
- Take noise reduction measures.
- Check the configuration of the main base unit in the CPU module.
- Reset and restart the CPU module. If the same error is displayed again, this suggests a
CPU module hardware fault. Contact your local service center.
A01 MULTI CPU ERROR 1432
Details
- A communication timeout error with another CPU was detected during the multi-CPUs
high-speed communication.
Remedy
- Reset and restart the CPU module. If the same error is displayed again, this suggests a
CPU module hardware fault. Contact your local service center.
A01 MULTI CPU ERROR 1433
Details
- A communication error with another CPU was detected during the multi-CPUs high-speed
communication.
Remedy
- Take noise reduction measures.
- Check the configuration of the main base unit in the CPU module.
- Reset and restart the CPU module. If the same error is displayed again, this suggests a
CPU module hardware fault. Contact your local service center.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi C70 and is the answer not in the manual?

Mitsubishi C70 Specifications

General IconGeneral
BrandMitsubishi
ModelC70
CategoryControl Unit
LanguageEnglish

Related product manuals