Mitsubishi FX3U-20SSC-H - Real Current Address (User) [BFM #21, #20, BFM #121, #120]; Real Current Address (Pulse) [BFM #23, #22, BFM #123, #122]; Received Target Address [BFM #25, #24, BFM #125, #124]; Received Target Speed [BFM #27, #26, BFM #127, #126]

11 Buffer Memory (Parameters & Monitored Data)
11.3 Monitor Data
229
FX3U-20SSC-H Positioning Block User's Manual
11
Buffer Memory
12
Program Example
13
Diagnostics
A
List of Parameters and Data
B
Version Information
11.3.13 Real current address (User) [BFM #21, #20, BFM #121, #120]
The Real current address data is stored in units specified by the user
*1
. (Ver.1.20 or later)
*1. Refer to the section shown below for details on the user units.
→ Refer to Section 7.10
POINT
• The real current address (user) is "Current address (user) - Deviation counter."
• Units specified by the user are adopted, and the position data magnification is included.
11.3.14 Real current address (Pulse) [BFM #23, #22, BFM #123, #122]
The Real current address is converted into pulses and stored. (Ver.1.20 or later)
POINT
• The real current address (pulse) is "Current address (pulse) - Deviation counter."
11.3.15 Received target address [BFM #25, #24, BFM #125, #124]
The target address for the positioning operation currently being executed is stored in units specified by the
user
*1
. (Ver.1.20 or later)
*1. Refer to the section shown below for details on the user units.
→ Refer to Section 7.10
POINT
• The target address for the table number currently being executed is stored during table operation.
• Variable speed operation is not supported.
11.3.16 Received target speed [BFM #27, #26, BFM #127, #126]
The target speed for the positioning operation currently being executed is stored in units specified by the
user
*1
. (Ver.1.20 or later)
*1. Refer to the section shown below for details on the user units.
→ Refer to Section 7.10
POINT
• The target speed for the table number currently being executed is stored during table operation.
BFM Number
Description Value Format Default
X-axis Y-axis
BFM #21,#20
BFM
#121,#120
-2,147,483,648 to 2,147,483,647 (user unit)
*1
Decimal -
BFM Number
Description Value Format Default
X-axis Y-axis
BFM #23,#22
BFM
#123,#122
-2,147,483,648 to 2,147,483,647 PLS Decimal -
BFM Number
Description Value Format Default
X-axis Y-axis
BFM
#25,#24
BFM
#125,#124
-2,147,483,648 to 2,147,483,647 (user unit)
*1
Decimal -
BFM Number
Description Value Format Default
X-axis Y-axis
BFM
#27,#26
BFM
#127,#126
-2,147,483,648 to 2,147,483,647 (user unit)
*1
Decimal -