5 Wiring
5.4 Connecting the SSCNET III Cabling
34
FX3U-20SSC-H Positioning Block User's Manual
5.4.2 Cautions for SSCNET III cable wiring
Secure the cable close to the connector with bundle material in order to prevent the SSCNET III cable from
applying its own weight to the connector.
Reserve the following distance when wiring.
1) Wiring duct
If the duct is below the bottom of the 20SSC-H, leave sufficient clearance to eliminate effects on the
SSCNET III cable. The space height should be 70 mm (2.76") minimum.
2) Bundling
70mm (2.76")
Optical cord
Loose slack
Bundling material
Recommended:
NK Clamp SP Type (NIX, INC)
Cable
To Next Page
Loading...
