Appendix B: Version Information
Appendix B-1 Version Information
291
FX3U-20SSC-H Positioning Block User's Manual
11
Buffer Memory
12
Program
Example
13
Diagnostics
A
List of
Parameters and
Data
B
Version
Information
Appendix B: Version Information
Appendix B-1 Version Information
Appendix B-1-1 Version check method
The version of 20SSC-H can be checked by the following method.
1) In the 20SSC-H, users can obtain the 20SSC-H version information by monitoring buffer memory #17
(decimal number).
2) The Version of the product can be seen from the manufacturer's serial number "VERSION" indicated on
the label adhered to the right side of the product.
Appendix B-1-2 Version Upgrade History
The 20SSC-H has undergone the following upgrades.
Version Contents of version upgrade
Ver.1.00 First product
Ver.1.10 • Reciprocal movement instruction added to Positioning Operation Patterns
• Ring counter setting added
- Ring operation rotation direction for absolute address
• Mode Selection added to the Interrupt 1-speed Constant Quantity Feed
• The following functionalities added to MPG Input Operation
- MPG Response
- Torque Limit
- MPG Input Selection
• Servo Parameter Transfer Mode added
• System Reset added
• The servo parameter update stop command function is added
Ver.1.20 • Sudden stop selection added
• Interpolation gear ratio selection
• Real current value monitor added
• Positioning completion signal output waiting time added
• Received target address added
• Received target speed added
• Positioning completion signal output waiting time added
Right side
Version
To Next Page
Loading...
