11 Buffer Memory (Parameters & Monitored Data)
11.5 Table Information
249
FX3U-20SSC-H Positioning Block User's Manual
11
Buffer Memory
12
Program
Example
13
Diagnostics
A
List of
Parameters and
Data
B
Version
Information
4. Operation information
Sets the positioning operation for table operation and changes the current address.
Set the numeric value corresponding to each operation to the operation information.
→ Refer to Subsection 10.1.3
5. m code information
m code is output each time at positioning operation.
For instructions on how to use the m code, refer to the following.
→ Refer to Section 10.9
No code • • • • • • • • • • • • • • • -1
m code after mode • • • • 0 to 9999
m code with mode • • • • • 10000 to 32767
To Next Page
Loading...
