Mitsubishi FX3U-20SSC-H - Page 55

7 Before Starting Positioning Operation
49
FX3U-20SSC-H Positioning Block User's Manual
1
Introduction
2
System configuration
3
Example Connection
4
Installation
5
Wiring
6
Memory configuration and data
7
Before starting positioning control
8
Manual control
9
Positioning Control
10
Table Operation
7.1 Note on Setting Parameters
4 Setting positioning parameters and servo parameters to be changed from the
default value
For the setting method, refer to the following.
→ Refer to the Subsection 7.1.2