5 - 47
No. 99MBB091A
5. MODIFYING THE MEASUREMENT CONDITIONS
F1 F2 F3 F4
F1 F2 F3 F4
Rmr Slice level
(0.0 999.9
m
)
4 5 6
7
10.0
BS
AC
8 9
m
1 2
0 .
3
ESC
<Reference Line Level Input screen>
Rmr Reference line
4 5 6
7
10
BS
AC
8 9
1 2
0 .
3
ESC
%
(0 100
%
)
8
5
6
7
Slice level input field
[Enter]
Reference line level
input field
[Enter]
<mr Measurement Condition Setup window>
m
Ra
Ry
CAL.
1.83
7.1
2000-01-01
m
CARD
Condition
JIS1994
GAUSS
c
0.8mm
5
(AUTO)
RANGE
Rmr
12
10
10.0
N
REF.LINE
S.LEVEL
%
m
<mr Measurement Condition Setup window>
m
Ra
Ry
CAL.
1.83
7.1
2000-01-01
m
CARD
Condition
JIS1994
GAUSS
c
0.8mm
5
(AUTO)
RANGE
Rmr
12
10
10.0
N
REF.LINE
S.LEVEL
%
m
Reference line
level button
Slice level button
<Slice Level Input screen>
Touch the reference line level button.
The Reference Line Level Input screen will appear.
Enter the reference line level in the reference line level input
field, then touch the [Enter] button.
The input range is as follows:
0 to 100% (in 1% increments)
TIP For information about inputting numeric values
refer to “■ Inputting numeric values” in section
2.2, “Outline of the Touch Panel”.
Returns to the mr Measurement Condition Setup window.
Touch the slice level button.
The Slice Level Input screen will appear.
Enter the slice level in the Slice level input field, then touch
the [Enter] button.
The input range is as follows:
0.0 to 999.9µm (in 0.1µm increments)
0 to 9999µin (in 1µin increments)
TIP For information about inputting numeric values
refer to “■ Inputting numeric values” in section
2.2, “Outline of the Touch Panel”.
Returns to the mr Measurement Condition Setup window.
To Next Page
Loading...
